Smoking out of a bubbler is a popular way to consume dry herb. It provides a smooth, filtered smoking experience that is similar to smoking out of a bong but in a more compact size. Whether you’re a beginner or an experienced smoker, this ultimate guide will teach you everything you need to know about smoking out of a bubbler.
What is a Bubbler?
A bubbler is a type of water pipe that combines the benefits of a bong and a pipe. It features a bowl where you put your herb, a stem that leads the smoke to the bottom of the pipe, and a chamber that fills with water to filter the smoke. This filtration process produces smooth and clean smoke, making it more enjoyable to inhale.
How to Smoke Out of a Bubbler?
Step 1: Fill the Chamber with Water
Before packing the bowl, fill the chamber with water. The amount of water you need depends on the size of your bubbler. The water level should be enough to cover the downstem entirely but not too high that it will find its way to your mouth.
Step 2: Pack the Bowl with Herb
Use a grinder to grind your herb into fine pieces. You can either grind your herb by hand or use a grinder. Then, scoop some of the ground herb using the spoon from the bubbler’s bowl. Pack the bowl tightly, but not too tight, to ensure that the smoke can pass through cleanly.
Step 3: Light up the Bowl
Hold the bubbler’s mouthpiece to your lips and use a lighter to ignite the herb. Light the edge of the bowl to ensure that the fire spreads. Start inhaling the smoke gently and let your bubbler fill with smoke as you take your drag.
Step 4: Clear the Smoke
Once the bubbler is full of smoke, remove the lighter and continue inhaling the smoke. Plug the carb hole with your finger and continue inhaling until the bubbler is empty. Then, release the carb hole by removing your finger, and take in that last hit of smoke.
How to Clean a Bubbler?
Step 1: Disassemble the Bubbler
The first step is to disassemble the bubbler. Take a close look at the bubbler’s components and identify which parts are removable. Take the bowl, the stem, and the chamber apart carefully. You can also use a small cleaning tool, such as a paper clip, to remove any residue from the small openings.
Step 2: Rinse the Components with Warm Water
Rinse the bowl, stem, and chamber under warm water to remove any loose residue or debris. Use warm water to help dissolve any remaining resin stuck to the surface. Shake the components gently to loosen any other trapped residues.
Step 3: Soak the Components in Cleaning Solution
If warm water is not enough to dissolve the residues, you can use a cleaning solution instead. Soak the bubbler’s components in a cleaning solution that is designed to clean bongs or bubblers. Read the instructions of the cleaning solution before using it. You can leave the solution overnight to remove the toughest residue.
Step 4: Scrub the Components with Pipe Cleaners
If the cleaning solution is not effective enough, you can scrub the components with a pipe cleaner. Dip the pipe cleaner in soap or alcohol and gently scrub the interior of the stem and chamber. Scrub the bowl using a brush or toothbrush.
Step 5: Rinse and Dry the Components
Rinse the components under warm water until all the cleaning solution is removed, then dry them with a towel or a microfiber cloth. Make sure that there is no moisture left inside the bubbler before reassembling it.
How to Choose the Best Bubbler?
Size
The size of the bubbler is a significant factor when choosing one. A larger bubbler produces larger hits, but it may not be portable. Smaller bubblers, on the other hand, are easier to carry but may not provide large smoke volume.
Material
Bubblers are made from different materials such as glass, silicone, or acrylic. Glass bubblers are the most common type and are the most durable. Silicone bubblers are more lightweight and shatterproof than glass ones. Acrylic bubblers are the cheapest, but they tend to wear quickly.
Percolators
Percolators are small structures inside the bubbler’s chamber that diffuses the smoke further. They can help reduce the harshness and cool down the smoke. There are many different types of percolators that you can choose from, all offering different benefits.
Carb Hole
The carb hole is a small hole located on the side of the bubbler that controls airflow. It allows you to clear the chamber of smoke quicker by pulling air into the chamber from outside. Some bubblers have a carb hole, while others don’t; it’s all down to personal preference.
How to Use a Bubbler Kit?
A bubbler kit usually comes with a bubbler, a bowl, a dabber, and a carb cap. Here’s how you can use it:
- Fill the chamber with water.
- Place the bowl inside the bowl joint of the bubbler.
- Heat the dabber using a torch until it’s red hot.
- Place the dab on the heated nail and put the carb cap on top of the nail.
- Finally, inhale through the mouthpiece of the bubbler.
Conclusion
A bubbler is an excellent way to smoke dry herb. It provides a smooth and clean smoking experience, making smoking more enjoyable. With this ultimate guide, you’ll be able to smoke out of a bubbler like a pro in no time.
Common Questions about Smoking Out of a Bubbler
- Q: Can you put ice in a bubbler?
- A: Yes, you can put ice in a bubbler to cool down the smoke.
- Q: How often should I clean my bubbler?
- A: You should clean your bubbler after every use or once a week if you use it frequently.
- Q: Is a bubbler better than a pipe?
- A: It depends on personal preference, but a bubbler provides better filtration and a smoother smoking experience.
References
1. https://www.leafly.com/news/cannabis-101/what-is-a-bubbler
2. https://www.rollingstone.com/culture/culture-features/bubblers-easiest-water-pipe-905891/
3. https://wayofleaf.com/cannabis/101/what-is-a-bubbler
4. https://www.wikileaf.com/thestash/how-often-to-clean-bong/