How to do a french fishtail plait


Doing a french fishtail plait is a great way to show off your hair styling skills. Before beginning your hairstyle, there are a few important steps to take in order to make sure that your styling will turn out the way you want it to.

  1. Make sure that your hair is brushed and free of tangles.
  2. Choose the appropriate styling products to keep your hair in place and make sure the plait stays neat throughout the day.

Gather the necessary materials (comb, hair ties, hair clips, etc.)

Before attempting a fishtail plait or a French plait, ensure you have all the necessary materials and tools. This hairstyle will require a fine-toothed comb, sturdy hair ties and clips, as well as hairspray to set the hairstyle and prevent flyaways.

Using a comb, make sure that your hair is detangled before beginning any hairstyling process. Brush through tangles and remove any knots using a wide-tooth brush or your fingers. You may also need to use some product such as hairspray or styling spray for extra hold and to keep stray hairs in place.

Next, you’ll want to section off any pieces of hair that you don’t want included in your braid. Secure those sections with clips, so they stay out of the way as you create the plait.

Once all of your supplies are ready and your hair is free of tangles, then it’s time to start braiding!

Make sure your hair is clean and dry

Before you start a french fishtail plait, it is important to ensure your hair is clean and dry. First, brush your hair to make sure there are no knots and that the parts of your hair you want to plait are tangle-free. If you have wavy or curly hair, it may be helpful to brush out the curls for an easier styling experience.

If your hair is greasy or oily, wash it with shampoo and lather up the scalp with conditioner from roots down to tips. Allow it to condition for 10 minutes before rinsing thoroughly. Towel dry or blow dry fully to make sure there’s no excess moisture that can give your hairstyle a frizzy appearance later on when styling.

Invest in a good quality hairspray or mousse that will help keep the braid intact for longer duration and also provide some volume and texture. Lastly, divide your hair into two sections and start working on the french fishtail plait.

Divide the Hair

Before you begin to do a french fishtail plait, you need to divide the hair into two sections. Splitting the hair into two sections will make it much easier to work with and keep the plait looking nice and neat.

Once you have split the hair into two sections, you can begin to work on the plait.

Part the hair down the middle

Parting the hair down the middle is an important step before attempting any type of French fishtail plait. It allows you to separate the sections you will use to create the plait. To do this, simply run a comb or brush along your scalp in a vertical line, starting at your forehead and ending at the nape of your neck.

As you move the comb downwards, it should split your hair into two equal sections – one on each side of your head. Make sure to separate both sections completely before attempting a French fishtail plait.

Separate the hair into two sections

Start by dividing the hair down the middle to create two even sections, one on the left and one on the right. Secure each side with a small hair tie. Gently pull apart the two sections to tighten them up. Be sure not to tug too hard – you don’t want to over stretch your hair.

To make neat and tight French Fishtail braids, you’ll need to make sure that your two sections remain just as tight throughout the braid. Separating each side into smaller strands is key!

Start the Plait

A sleek and chic french fishtail plait is a go-to style for any occasion. From a day at the beach to a wedding day look, this style is sure to keep you looking your best.

To start the plait, it is best to begin with freshly washed and dried hair that is free of any styling product. If you have naturally curly hair, use a heat tool to straighten it. Now, you are ready to start the plait.

Take a small section of hair from the left section and add it to the right section

Before you begin the French fishtail plait, you will want to make sure that your hair is detangled and then split it down the middle. This is done by parting your hair from ear to ear and combing each side into two sections.

Once this has been achieved, take a small section (no bigger than 1 inch) of hair from the left side and divide it into two pieces. Carefully add one of the two smaller pieces over to the right section. Now repeat this same process but with a small piece of hair from the right section instead. Continue doing this until there is no more loose hair left and secure the braid with an elastic band at the end.

Take a small section from the right section and add it to the left section

To begin the plait, take a small section from the right side of the hair and add it to the left section. The size of this initial section will depend on how tight or loose you’d like your braid to be. Make sure you don’t take any too large sections. You should then repeat this process on other side, taking a small sections from the left side and adding it to the right section. The end result should be two sections of roughly equal size – the two separate sections that you’ll need to weave together for your braid. Be sure to keep each section just as taut as its counterpart while you work with them both.

When you’ve got them in position, use your fingers (or a comb if needed) to brush out any tangles that may have crept in before continuing further with your plait.

Continue the Plait

The french fishtail plait is a classic hairstyle that is timeless and easy to do. It’s an elegant hairdo that looks amazing on any hair length.

In this article, we’ll take you through the steps to create a french fishtail plait. We’ll start off by discussing the basics of the french fishtail plait and then move on to the step-by-step instructions for continuing the plait.

Repeat the process of crossing the sections until you reach the end of the hair

To continue the fishtail plait, take the right section again and pass it over the left section – this time you don’t add any new strands. Now, pick up a small strand from the side of the left piece and combine it with the left piece for the next step. Again, take this combined strand and cross it over to join with the right section. Take some small strands from both sides and incorporate them into one piece which will be passed to the opposite side.

Repeat this process of crossing alternating sections until you reach the end of your hair. Secure with an elastic band or bobby pins as desired. Finish by lightly misting your hair with a fixing spray to hold your style in place all day long!

Secure the end of the plait with a hair tie

To secure the end of the braid, you’ll want to wrap a small strand of loose hair around the hair tie to keep it in place. Take a small section of loose hair from one side and wrap it snugly around the base of your plait two or three times, making sure to hold both ends securely. Tuck the ends underneath and make sure they don’t loosen as you move up the plait. This will ensure that your plait stays in place for as long as possible.

If you would like an extra layer of protection, use a tiny drop of styling product such as serum or wax on these strands before wrapping them. With practice and fine-tuning, you’ll be able to master this classic style in no time!

Finishing Touches

Once you have mastered the basic techniques needed to do a french fishtail plait, it is time to focus on the finishing touches. This could include:

  • Sectioning the hair in equal parts.
  • Using elastics to secure the plait.
  • Giving the plait a twist.

These simple steps can really make all the difference in creating the perfect french fishtail plait.

Use your fingers to loosen the plait and make it look fuller

Once you’ve completed your plait, use your fingers to gently separate the strands and pull them apart to create more texture and fullness. This is also known as “teasing” the plait, although instead of backcombing it, you’re just loosening it up. You can also take small sections from the bottom of each side and tuck them underneath for a more finished look. Finally, use hairpins or a small elastic band to secure the end of the plait in place.

Secure the plait with bobby pins or hair clips

Securing your fishtail plait will help to keep it looking neat and polished all day. Depending on the length and texture of your hair, determine what type of product or accessories you’ll need to secure the plait. For longer hair, it may be easier to use small metal bobby pins or elastic bands, while for shorter hair, try using smaller colored hair clips.

If using bobby pins, slide them along each side of the plait at regular intervals. Starting at one end, slide the pin into the hair about a centimeter above the elastic band and slightly angle it towards your head. Slide another pin in from behind on the same section; this will ensure that your pins are secure and won’t slip out with movement. Repeat on both sides until you have secured as much of your fishtail as possible.

If using smaller hair clips to hold the plait together, place them into sections around 1-2 inches wide along each side of the braid – similar in style to how you would secure a regular french plait – depending on how much you want to show off your style! With most small colorful clips they can also become part of whatever outfit you decide to wear that day!

Apply hairspray to keep the plait in place

Once you have achieved your desired fishtail plait, the final step is to apply hairspray to help hold it in place. This should be done lightly and sparingly, as too much hairspray can lead to a stiff and unnatural look. Working from the back of your head to the front, use a light spritzing motion and keep the spray approximately six inches away from your hair.

If you feel that additional security is necessary, using bobby pins or small claw clips can also be effective in helping to keep a french fishtail plait in place while providing more permanent security throughout the day. Start at the bottom of your plait, adding several pins as required until you reach your scalp. Be sure not to pull on your plait too tightly and keep pins secure yet comfortable within your hair at all times.

Leave a Reply

Your email address will not be published. Required fields are marked *